2019 UniCarriers Forklift Platinum II Cushion Tire CF30
Selling Price -
$13,950.00
TIRES : DR:04485102.
MAST TYP: 3 STAGE
LIFT HT : 83 / 187
MAST # : 20190719A050
FORKS : 70175-4-48-2
POWER : GK21K MOTOR
ENG MOD#: O/F:2I3892, A/F:A000003458,
TRANS # : KJ1914206
TRANS FILTER : 31728-40K00 (GSKT: 31729-40K00)
HYD VLVE: 3 SPOOL
ATT TYPE: INTEGRAL
MSC1 : CNTR: 2G3712BF00MEC131010C49320
MSC4 : CUSHION
Information
2019 UniCarriers Forklift Platinum II Cushion Tire CF30
Powered by our industrial LP, Dual Fuel (Gas/LP) or Gas* engines, our rugged Platinum II ® Internal Combustion (IC) lift truck deliver greater torque and horsepower for a variety of tough inside or outside applications, keeping your operation highly productive. Our fuel management system (LP/Gas) optimizes engine operation to provide excellent fuel economy and reduced exhaust emissions. Each Platinum II lift truck comes standard with our comprehensive engine protection system to warn operators in case of excessive heat or a severe drop in oil pressure, providing extended engine and drive train life for your lift truck investment.
Features may include:
GCT K21(2.1 liter) and K25 (2.5 liter) electronic fuel injected industrial engines in LP, LPS or dual fuel.
Engine/transmission protection and warning systems
Spacious operator compartment
Full suspension seat
Programmable service reminder
Operator PIN access
One-piece, no-tool floorboard & removable side panels
Wide engine access
Wide range of options available for chassis, mast and operator compartment
4 in (100mm) | (standard tires): 38.2 (970) in (mm) | - standard carriage: 32.4 (825) in (mm)
Maximum fork: 130 (3300) in (mm) | - top of OHG: 81.1 (2060) in (mm) | - top of standard LBR: 48 (1220) in (mm) | Counterweight: 45.3 (1150) in (mm) | Step: 17.1 (435) in (mm)
CP1F1-9N22646
Specifications
2019
UniCarriers Forklift
Platinum II Cushion Tire
CF30
Cushion Tire
Model: GK21
Output SAE gross: 55 (41) hp (kW) @ 2700
SAE gross: 111.4 (151) ft-lb (Nm) @ 2000
126 (2065) cu in (cm3 )
Automatic | Number speeds - fwd/rev 1/1
Full Hydraulic
Hand
18 x 6 x 12.13 | Tread - Center of Tire: 32.3 (820)
Travel - forward or reverse: 10.9 (17.5) mph (kmh)
Load Center: 24 (600) in (mm) | Standard freelift: 4 (100) in (mm) | Thickness: 1.5 in (40mm) | Standard mast - fwd/back: 5/10 degree | Mast lowered (OHL): 82.9 (2105) in (mm) | Mast extended with LBR: 179.3 (4555) in (mm) | Ramp breakover angle: 43 tan% | Departure angle: 35 tan% | Approach angle: 26 tan% | Overhang Front: 15.4 (390) in (mm) | Overhang Rear: 19.7 (500) in (mm) | Min Right Angle Stack claerance: 83.7 (2125) in (mm) | Headroom SIP to bottom of OHG: 42.1 (1070) in (mm)
Maximum fork: 130 (3300) in (mm) | - top of OHG: 81.1 (2060) in (mm) | - top of standard LBR: 48 (1220) in (mm) | Counterweight: 45.3 (1150) in (mm) | Step: 17.1 (435) in (mm)
4 in (100mm) | (standard tires): 38.2 (970) in (mm) | - standard carriage: 32.4 (825) in (mm)
42 (1070) in (mm) | Min Right Angle Stack Add load: 83.7 (2125) in (mm)
(to face of forks): 81.9 (2080)
46.9 (1190) in (mm)
Under mast: 3.0 (75) in (mm) | Under power unit: 2.6 (65) in (mm) | Under frame (WB center): 4.3 (110) in (mm)